Advantech AVAS-402, Руководство пользователя

Страница: 5 / 25

Furthermore all configurations shall comply with the system standard IEC
60601-1- 1. Anyone who connects additional equipment to the signal input part
or signal output part is configuring a medical system, and is therefore,
responsible that the system complies with the requirements of the system
standard IEC 60601-1-1. The unit is for exclusive interconnection with IEC
60601-1 certified equipment in the patient environment and IEC 60XXX certified
equipment out-side of the patient environment. If in doubt, consult the technical
services department or your local representative.
Caution! Use suitable mounting apparatus to avoid risk of injury.
16. Grounding reliability can only be achieved when the equipment is connected
to an equivalent receptacle marked "Hospital Only" or "Hospital Grade".
17. Use a power cord that matches the voltage of the power outlet, which has been
approved and complies with the safety standard of your particular country.
Note! Environmental protection
Follow national requirements to dispose of unit.
18
. “WARNING - Do not modify this equipment without authorization of the
manufacturer.
”
19
. “WARNING – To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
20
. “CAUTION: This adapter Sinpro Power: Type: HPU101-107 is a forming part of the
medical device”.
21. Remove the power cord to fully turn off the device.
22. Installation is only to be carried out by trained and authorized personnel.
23. CAUTION! WARNING! If this device was not used in the manner which manufacturer
suggested, the end system shall evaluate for further compliance.
Explanation of Graphical Symbols
IEC 60878 and ISO 3864-B.3.6 : Warning: dangerous voltage
ISO 7000-0434 : Caution, consult ACCOMPANYING DOCUMENTS.
IEC 60417 -5009 : STAND-BY.
IEC 60417-5032 : Alternating Current
IEC 60417-5021 : Equipotentiality.