manualshive.com logo in svg

Advantech AIMB-786, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-786 Скачать руководство пользователя страница 90

AIMB-786 User Manual

78

7.1

Introduction

The AIMB-786 has dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes
(Intel I219LM (LAN1) and I211AT (LAN2)) that offer bandwidth of up to 500 MB/sec,
eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet at
1000 Mbps.

7.2

Features

10/100/1000Base-T Ethernet controller

10/100/1000Base-T triple-speed MAC

Full duplex at 10, 100, or 1000 Mbps and half duplex at 10 or 100 Mbps

Wake-on-LAN (WOL) support

PCIe x1 host interface

7.3

Installation

The integrated Intel gigabit Ethernet controller supports all major network operating
systems. However, the installation procedure varies with different operating systems.
In the following sections, refer to the one that provides the driver setup procedure for
the operating system you are using.

7.4

Windows Driver Setup

Enter the Advantech support website, then search product AIMB-786. You can see
"LAN" driver inside.

Note!

Before installing the LAN drivers, make sure the CSI utility have been 
installed on your system. See Chapter 4 for information on installing the 
CSI utility.

Содержание AIMB-786





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды