Advantech AIMB-786, Руководство пользователя

Страница: 15 / 116

3 AIMB-786 User Manual
Chapter 1
H
ardware
C
onfiguration
1.3.2 Memory

RAM:
Up to 64 GB in four 288-pin DIMM sockets supporting dual-channel
DDR4 2400/2666 SDRAM. AIMB-786 supports non-ECC unbuffered DIMMs
and does not support any memory configuration that mixes non-ECC with ECC
unbuffered DIMMs.
1.3.3 Input/Output

PCIe slot:
1 PCIe x16 expansion slot, 4 PCIe x4 expansion slots.

PCI bus:
2 PCI slots, 32-bit, 33 MHz PCI 2.2 compliant.

Enhanced parallel port:
One onboard parallel port, which supports SPP/EPP/
ECP mode. Standard DB-25 female connector cable is an optional accessory.

Serial port:
Six serial ports. One DB-9 connector with RS-232 is located in rear
panel, one header is RS-232/422/485 with hardware auto-flow control, and the
other four headers are RS-232.

USB port:
2 USB 3.1 Gen 2 ports on rear with up to 10 Gb/s data rate, 4 USB
3.1 Gen 1 ports (2 rear, 2 via header), 6 USB 2.0 ports (4 rear, 2 via header, 1
internal Type-A).

LPC:
One LPC connector to support Advantech LPC modules, such as PCA-
TPM-00B1E.

GPIO:
AIMB-786 supports 8-bit GPIO from super I/O for general purpose con-
trol application.
1.3.4 Graphics

Controller:
Integrated Intel HD Graphics.

Display memory:
Shared memory is subject to OS (maximum 1 GB shared
memory with 2 GB or above memory installed).

DisplayPort:
Resolution up to 4096 x 2304 @ 60 Hz refresh rate.

DVI-D:
Resolution up to 1920 x 1200 @ 60 Hz refresh rate.

VGA:
Resolution up to 1920 x 1200 @ 60 Hz refresh rate.
1.3.5 Ethernet LAN
 Supports dual 10/100/1000Base-T Ethernet ports via PCIe x1 bus which pro-
vides a 500 MB/s data transmission rate.

Interface:
10/100/1000Base-T.

Controller:
Intel I219-LM(PHY) for LAN1, Intel I211-AT for LAN2.
1.3.6 Industrial Features

Watchdog timer:
Can generate system reset or NC. The watchdog timer is pro-
grammable, with each unit equal to one second (255 levels).
Note! AIMB-786 is not equipped with PS/2 connector for keyboard/mouse.
Please purchase an optional PS/2 keyboard/mouse cable (P/
N:1700019268-11) and its bracket (P/N:1960063434N000) to be
installed on the chassis rear slot.