manualshive.com logo in svg

Advantech AIMB-760, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-760 Скачать руководство пользователя страница 72

AIMB-760 User Manual

58

Chapter 4  Chipset Software Install Utility

4.1  Before you begin

To facilitate the installation of the enhanced display drivers and utility 
software, read the instructions in this chapter carefully. The drivers for 
the AIMB-760 are located on the software installation CD. The auto-run 
function of the driver CD will guide and link you to the utilities and driv-
ers under a Windows system. The Intel® Chipset Software Installation 
Utility is not required on any systems running Windows NT 4.0. Updates 
are provided via Service Packs from Microsoft*.

Before you begin, it is important to note that most display drivers need to 
have the relevant software application already installed in the system 
prior to installing the enhanced display drivers. In addition, many of the 
installation procedures assume that you are familiar with both the rele-
vant software applications and operating system commands. Review the 
relevant operating system commands and the pertinent sections of your 
application software’s user manual before performing the installation.

4.2  Introduction

The Intel® Chipset Software Installation (CSI) utility installs the Win-
dows INF files that outline to the operating system how the chipset com-
ponents will be configured. This is needed for the proper functioning of 
the following features:
•  Core PCI PnP services
•  IDE Ultra ATA 100/66/33 and Serial ATA interface support
•  USB 1.1/2.0 support (USB 2.0 driver needs to be installed separately 

for Win98)

•  Identification of Intel® chipset components in the Device Manager

Note:

The files on the software installation CD are 
compressed. Do not attempt to install the driv-
ers by copying the files manually. You must use 
the supplied SETUP program to install the driv-
ers.

    

Содержание AIMB-760





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды