manualshive.com logo in svg

Advantech AIMB-760, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-760 Скачать руководство пользователя страница 54

AIMB-760 User Manual

40

3.4.2 Hard Disk Boot Priority

Set hard disk boot device priority.

3.4.3 Virus Warning

Enables or disables the virus warning.

3.4.4 CPU L1 & L2 Cache

Enabling this feature speeds up memory access. The commands are 
“Enabled” or “Disabled.”

3.4.5 Hyper-Threading Technology

While using a CPU with Hyper-Threading technology, you can select 
“Enabled” to enable Hyper-Threading Technology in an OS which sup-
ports Hyper-Threading Technology or select “Disabled” for other OSs 
which do not support Hyper-Threading technology.

3.4.6 Quick Power On Self Test

This allows the system to skip certain tests to speed up the boot-up proce-
dure.

3.4.7 First/Second/Third Boot Device

The BIOS tries to load the OS from the devices in the sequence set here. 
The options are: “Floppy”, “LS120”, “HDD-0”, “SCSI”, “CDROM”, 
“HDD-1”, “HDD-2”, “HDD-3”, “ZIP100”, “USB-FDD”, “USB-ZIP”, 
“USBCDROM”, “USB-HDD”, “LAN”, and “Disabled”.

3.4.8 Boot Other Device

Use this to boot another device. The options are “Enabled” and “Dis-
abled”.

3.4.9 Swap Floppy Drive

If the system has two floppy drives, choose “Enabled” to assign physical 
drive B to logical drive A and vice-versa. The commands are “Enabled” 
or “Disabled”.

3.4.10 Boot Up Floppy Seek

Selection of the command “Disabled” will speed the boot up. Selection of 
“Enabled” searches disk drives during boot up.

3.4.11 Boot Up NumLock Status

Sets the boot up status Num Lock. The options are “On” and “Off”.

3.4.12 Gate A20 Option

“Normal”: A pin in the keyboard controller controls GateA20. Fast 
(Default) lets chipset control GateA20.

Содержание AIMB-760





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды