manualshive.com logo in svg

Advantech AIMB-760, Руководство пользователя

Поделиться
Скачать
Advantech AIMB-760 Скачать руководство пользователя страница 2

AIMB-760 User Manual

ii

Copyright

This document is copyrighted, 2006, by Advantech Co., Ltd. All rights 
are reserved. Advantech Co., Ltd. reserves the right to make improve-
ments to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of 
Advantech Co., Ltd. Information provided in this manual is intended to 
be accurate and reliable. However, Advantech Co., Ltd. assumes no 
responsibility for its use, nor for any infringements upon the rights of 
third parties which may result from its use.

Acknowledgements

• AWARD is a trademark of Phoenix Technologies Ltd.
• IBM and PC are trademarks of International Business Machines Cor-

poration.

• Intel®, Pentium® 4, and Celeron® D are trademarks of Intel Corpora-

tion.

• WinBond is a trademark of Winbond Corporation.
• All other product names or trademarks are the properties of their 

respective owners.

Part No. 2002076001  2nd Edition
Printed in Taiwan 

February 2006

Содержание AIMB-760





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды