Advantech AIMB-330F, Руководство пользователя

Страница: 81 / 124

67 Chapter 6
6.6.3 Super I/O Device
Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.
Select Super I/O Device and press “enter”, setting super I/O feature.
6.6.4 Init Display First
This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: PCI Slot, Onboard.
6.6.5 PWR ON After PWR Fail
Option is OFFand ON. Select ON if user want Power On after Power
Fail, the default is “OFF”
6.6.6 Onboard Serial Port 3/4/5/6 Use IRQ
For settings reference the Appendix for the serial resource allocation, and
Disabled for the on-board serial connector.
6.6.7 Onboard Parallel Port2
This field sets the address of the on-board parallel port connector. You
can select either 3BCH/IRQ7, 378H/IRQ7, 278H/IRQ5 or Disabled. If
you install an I/O card with a parallel port, make sure there is no conflict
in the address assignments. The CPU card can support up to three parallel
ports, as long as there are no conflicts for each port.
6.6.8 Parallel Port2 Mode
This field allows you to set the operation mode of the parallel port. The
setting “Normal” allows normal speed operation, but in one direction
Figure 6.9: Super I/O Device