Advantech AIMB-330F, Руководство пользователя

Страница: 38 / 124

AIMB-330F User’s Manual 24
2.18.3 LCD VDDSAFE setting (JP2)
The AIMB-330F's VGA interface supports 5 V and 3.3 V LCD displays.
By changing the setting of JP2, you can select the panel video signal level
to be 5 V or 3.3 V.
Configuration of the VGA interface is done completely via the software
utility. You do not have to set any jumpers. Refer to Chapter 3 for soft-
ware setup details.
2.18.4 Inverter power connector (CN17)
There is a 5pin connector (CN17) for inverter with +12V and +5V power
connector.
2.19 Ethernet configuration
The AIMB-330F is equipped with a high performance 32-bit PCI-bus
Ethernet interface which is fully compliant with IEEE 802.3 u
10/100Mbps CSMA/CD standards. It is supported by all major network
operating systems.
It has an optional 10/100/1000Base-T Ethernet interface which is fully
compliant with IEEE 802.3z/ab.
2.19.1 RJ-45 connector (CN9)
100/10Base-T connects to the AIMB-330F via an RJ-45 standard jack.
2.19.2 Network boot
The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The Boot
ROM BIOS files are on the included utility disk.
Table 2.3: LCD power (JP2)
Closed pins Result
1-2 +5 V LCD panel
2-3 +3.3 V LCD panel*