Advantech AIMB-330F, Руководство пользователя

Страница: 30 / 124

AIMB-330F User’s Manual 16
When the CPU is installed, the lever should snap into place at the side of
the socket.
2.5.2 CMOS clear (JP1)
2.6 DRAM installation
There are two on-board 186-pin DDR DIMM sockets.
2.6.1 DDR SDRAM (DIMM 1 and DIMM 2)
You can install one DDR SDRAM (up to 1 GB) or two 186-pin DIMM
(up to 2 GB DRAM) in the DIMM sockets.
Note: To remove a CPU, pull the lever out to the side a
little and raise it
Warning! To avoid damaging the computer, always unplug
the power cord to turnoff the power supply
before setting “Clear CMOS.” Use a pencil or a
tool to press the tactile-switch.
Caution! When installing DIMM, make sure the module is
oriented properly. Do not use excess force during
installation.