Advantech AIMB-217, Руководство по началу работы

Страница: 8 / 43

Copyright 2019. All rights reserved. Advantech Co. Ltd.
Page 8
2. G
ETTING
S
TARTED
In this section, we will introduce the steps of booting up the Advantech Advantech
QuickStart Image from USB flash drive on an Advantech AIMB-217 network
appliance.
The table below shows the SKU configuration of AIMB-217:
Part Number Configuration
AIMB-217
Intel® Pentium, Celeron Quad Core & Dual Core
processor
Intel® Celeron® N3350 chipset
2x DDR3L
2x RJ-45 LAN ports
2x SATA (including mSATA slot)
4x USB3.0
8x USB2.0 (including mPCIe and mSATA slots)
1x PCI Express
1x M.2 E reserved for WiFi/BT module
1x miniPCIe
1x Jack Audio
6x COM-ports
Table 4: AIMB-217 SKU configuration
Please refer to the AIMB-217 user’s manual for detailed HW information, e.g. port
locations, etc.
2.1 Accessories and Facilities Required
The following accessories shall be prepared:

Advantech provided USB drive with AIMB-217 image.

Advantech provided W163 Wi-Fi/Bt module.

Monitor that supports one of provided interfaces: VGA/HDMI/DP.

Keyboard with USB connection.

RJ45 Ethernet cable (required for accessing Internet if has now WiFi nearby)
(user supplied)
2.2 Cable and System Connections
The system front view, top and bottom views of the AIMB-217 as well as the
descriptions of components on the front or top/bottom panel are shown in Figure 1,
Table 5, Figure 2, Figure 3, Figure 4 and Figure 5 respectively. Before connecting
AIMB-217 to the power outlet, finish the cable connections first.

Plug the Advantech Image USB drive into either one of the AIMB-217 USB
3.0 ports (Figure 1)

Connect to VGA/HDMI/DP port your monitor (Figure 1)

Connect keyboard to one of USB 3.0 ports (Figure 1)

Connect RJ45 Ethernet cable to one of RJ-45 LAN ports (Figure 1) Connect
W163 to M.2. socket on the bottom of board (Figure 3)