Advantech AIIS-3411 Series Скачать руководство пользователя страница 66

Страница: 66 / 86

AIIS-3411 User Manual

4.1

Chipset Software Installation Utility

4.1.1

Before You Begin

To facilitate the installation of the enhanced display drivers and utility software, read

the instructions in this chapter carefully. The drivers for the AIIS-3411 are located on

the Advantech support website (http://www.advantech.com/support). Updates are

provided via Service Packs from Microsoft.

Before you begin, it is important to note that most display drivers need to have the rel

evant software application already installed on the system prior to installing the

enhanced display drivers. In addition, many of the installation procedures assume

that you are familiar with both the relevant software applications and operating sys

tem commands. Review the relevant operating system commands and the pertinent

sections of your application software’s user manual before performing the installation.

4.1.2

Introduction

The Intel

Chipset Software Installation (CSI) utility installs the Windows INF files

that outline to the operating system how the chipset components will be configured.

This is needed for the proper functioning of the following features:



Core PCI PnP services



Serial ATA interface support



Identification of Intel

chipset components in the Device Manager.

4.1.3

Windows Driver Setup

Enter the Advantech support website, then search for product AIIS-3411. You can

see the “AIIS-3411" driver inside.

Note!

For system stability, installing the drivers in the following sequence is

highly recommended:



Chipset



Graphics



Other drivers

Note!

The chipset driver is used for the following versions of Windows, and it

has to be installed before installing all the other drivers:



Windows 10 (64-bit)

Содержание AIIS-3411 Series























































































Результаты поиска

Содержание AIIS-3411 Series

Отзывы:

Бренды по названию

Популярные бренды

Advantech AIIS-3411 Series, Руководство пользователя

Результаты поиска

Содержание AIIS-3411 Series

Отзывы:

Бренды по названию

Популярные бренды