Advantech ACP-7000, Руководство пользователя

Страница: 41 / 52

31 ACP-7000 User Manual
Chapter 5
S
CSI Storage
and
RAID
5.4 Installing SCSI Disk Drives
5.4.1 Installing the SCSI Disk Drives
Please follow the installation procedures below.
1. Open the front door by turning the rotary lock.
2. Push up the latch on the mobile tray (See Figure 5.4) .
3. Press down the handle of the mobile tray and pull it out as far as it will go. Then
completely take out the tray (Refer to
Figure 5.5) .
4. Install a 3.5" x 1" high SCSI SCA 80-pin HDD to the tray using the six screws
(See
Figure 5.6 ).
5. Return the mobile tray with SCSI HDD to the disk drive housing and push it in by
the handle until it is locked into the original position.
6. Push down the latch to lock the tray in place.
Figure 5.4 Pushing up the latch
Figure 5.5 Removing the mobile tray
Note! There are various types of 3.5" SCSI HDDs on the market. You should
choose the SCSI SCA-2 80-pin 3.5” HDD. If you’re not sure which type
to choose, please contact a local sales representative.
1
2
3