Advantech ACP-2000MB, Руководство пользователя

Страница: 15 / 36

7 ACP-2000MB User Manual
Chapter 2
S
ystem
Setup
2.3 Installing Add-on Cards
The ACP-2000MB supports up to three add-on cards via the riser card. To install the
add-on cards, please proceed as follows:
1. Remove the corresponding I/O bracket attached to the rear plate of the chassis
(see Figure 2.1). Insert an add-on card vertically into the proper slot on the riser
card. For full-length cards, please make sure that the card bracket has been
inserted properly and the other edge of the card has been inserted into the plas-
tic guiding fillister. Then fasten the screws on the top of the I/O bracket. (see
Figure 2.2)
2. Repeat Step 1 if there is more than one add-on card to be installed.
Figure 2.1 Card cage with riser card
Figure 2.2 Installing PCI add-on card