7
ACP-1320BP User Manual
Chapter 2
S
ystem
Setup
2.3
Installing the backplane and the CPU card
ACP-1320BP accepts 3-slot backplane. To install the backplane, refer to figures and
proceed as follows:
1.
Fix the backplane to the backplane holder (T-bar) of chassis with screws.
2.
Fix the CPU card on the backplane and card guide with screws.
3.
Fix the backplane holder (include CPU card and backplane) on the SATA BP
bracket and card guide on the chassis simultaneously with screws.
4.
Plug in the 20/24-pin ATX power connector and +12 V power connector from the
power supply, also the 9-pin USB connectors from the front panel of the chassis.
5.
Connect the POWER SW, RESET SW, LAN LED from chassis to the backplane
and HDD LED cables from the alarm board to the backplane.
Figure 2.2 Installing a backplane, CPU card and add-on card
Note!
To ensure the best air flow inside the chassis, choosing a CPU cooler
which is lower than 22 mm is highly recommended.
Содержание ACP-1320BP
