C
ONFIGURATION
U
TILITY
49
3.1. Overview
This section describes the installation procedures for the Advantech EKI Device Configura-
tion Utility.
The Configuration Utility is the software tool for setting up and monitoring the EKI-5000
Series.
3.2. Enabling ProView Function
The configuration of a ProView switch can be accessed by using EKI Device Configuration
Utility. To install the software utility see “Installing the Configuration Utility” on page 50.
The ProView features for the device must be enabled. The following guidelines allow you to
enable and disable the ProView features.
To fully access all the available options in the Configuration Utility, administrative privileges
are required. Without the use of administrative privileges, some functions of the
Configuration Utility are not accessible.
Before continuing further, any devices selected for configuration must be connected and
powered on, see “Installation Guidelines” on page 35.
1.
From your Windows desktop, locate the
Start
button to open the Start Menu.
2.
Navigate to
All Programs
>
EKI Device Configuration Utility
.
3.
Locate
Advantech EKI Device Configuration Utility
and right-click on it.
From the pop-up menu, select
Run as Administrator
.
See your network administrator to obtain the privileges required.
4.
A security screen displays, select
Yes
to continue.
5.
Select
Search Again
to detect any connected devices.
Once a device is detected, it is listed under the
EKI Device
listing in the
Tree View
.
6.
Select the device to configure by clicking on it.
7.
Select
System
tab to bring up the
Enable ProView Features
field.
Before a device can be configured, the ProView feature must be enabled.
Microsoft Windows 7 is used as a reference for the development of the following
guidelines. The following navigation references may differ depending on your oper-
ating system.
Содержание EKI-5000 Series
