W900iTR User Guide
1-1
1. Overview
The W900iMTR allows you to build your own long-range, non-line-of-sight, point-to-point or point-to-
multipoint wireless Ethernet solution that can enable fringe Ethernet devices, including SCADA clients, bio-
scanners, printers, PCs, VoIP phones, point-of-sale devices, digital signage, or Internet kiosks. Each access
point can have up to 16 subscribers. The latest version is now IP addressable and POE enabled.
The W900iMTR solution offers the ideal combination of price, range, data rate, security, interference
avoidance, quality-of-service, and ease-of-use.
1.1 Features
Built-in spectrum analyzer
128 bit AES Encryption, FIPS 197/NIST Certified
Remote diagnostics, link analysis and firmware upgrades via built-in browser interface.
High RF output power provides maximum foliage or wall penetration
Range of 40 miles LOS with 15 dBi antenna
1.536 Mb/s RF Transmission Rate
Ethernet throughput of 935Kb/s
+21 dBm (4 Watts EIRP used with 15 dBi antenna)
Radio Link Budget 148 dB with 15 dBi antenna
Simple plug and play — minimal user programming required
Radio can be configured as an access point or subscriber client
Install up to 16 clients per access point
Can operate up to 12 access points, each on its own non-overlapping channel
Does not require an FCC license to operate or install
Channel selection with DIP switch or via Web browser interface
Power over Ethernet at 9-48VDC, pins 4/5 positive and7/8 ground or use separate power jack.
