Advantage Controls SFS Series, Инструкция по установке, обслуживанию и ремонту

Страница: 3 / 16

3
I. Introduction
The SFS system is engineered to inject city water into a bowl containing a solid chemical which will then be
dissolved and drained into a chemical solution tank based on high/low level switches. All systems primarily
consists of:
1. Liquid Level controller (except SFS-G01, SFS-G02, SFS-10 and SFS-20 models).
2. A Universal dissolving bowl.
3. ¼” plumbing manifold with shut-off, solenoid valve, pressure regulator and pressure gauge.
4. Molded solution tank with pump mounting shelf.
5. A two level float switch assembly (except SFS-G01, SFS-10 and SFS-20 models).
Note: Inlet water pressure needs to be at 45-50 psi for best disolution.
Model Numbering
SFS systems have two base controller models, a full featured 120 VAC controller or the mini 12 VDC control-
ler. Your unit may be supplied with one or more of the features described in this manual. To determine what
features apply to your unit, check the model number label located on the controller.
SFS-G01
- Single dissolving bowl in a tank with non-electric make-up valve.
SFS-G02
- Dual dissolving bowls in a tank with non-electric make-up valve
SFS-101 - Provides a mini 12 VDC controller, dissolving bowl and a supply water plumbing assembly mount-
ed on a molded solution tank.
SFS-201 - Provides two SFS-101 units mounted on a poly panel with one water inlet.
SFS-105 - Provides a 120 VAC Liquid Level Controller with one solution tank, liquid level controller, universal
dissolving bowl and a supply water plumbing assembly mounted on a poly panel.
SFS-205 - Provides a 120 VAC Liquid Level Controller, two universal dissolving bowls and a supply water
plumbing assembly, solenoid valve and five gallon solution tank mounted on a poly panel.
SFS-305 - Provides a 120 VAC Liquid Level Controller, three universal dissolving bowls and a supply water
plumbing assembly, solenoid valve and five gallon solution tank mounted on a poly panel.
SFS-10 - Dissolving bowl with 120 volt solenoid, pressure regulator, no tank or controller.
SFS-20 - Two dissolving bowls with one 120 volt solenoid, regulator, no tank or controller.