Advantage Controls SFS Series, Инструкция по установке, обслуживанию и ремонту

Страница: 13 / 16

13
VI. Trouble Shooting
PROBLEM CAUSE REMEDY
Solenoids not
activating
Power Source
Output Power
Bad or Dirty Level Floats
Faulty Wiring to Level Floats
Check power source
Check or replace fuse
Clean or replace as needed
Level floats as needed
System not spraying Dirty Bowl Injection Nozzle
Clogged Y-Strainer Screen
Low Water Pressure
Clean as needed
Clean as needed
Lower regulator setting
No system power Power Source
Check Fuse
Check power source
Replace as needed
No output power Check Ribbon (120/240V Controller)
Check Fuse
Make sure connection is fully seated on
both ends
Replace as needed
(C-2 Option)
False reading Bad or Dirty Electrode
Out of Calibration
Clean as needed
Calibrate unit
Will not calibrate Dirty Electrode
Faulty Electrode
Faulty Wiring to Electrode
Out of Calibration
Clean electrode
Replace controller or
Replace as needed
Calibrate unit
Alarm Lights ON System has utilized all bowls Reset to bowl #1