Advantage Controls GF with MegaTron XS, Инструкция по установке, обслуживанию и ремонту

Страница: 10 / 28

10
IV. Front Panel Description
3
4
5
2
1
8
9
0
7
6
SET UP
RUN
CANCEL HELP BACK
ENTER HOME
ACI MEGATRON
SYS1: TOWER CARD 1
COND 1,400 uS/cm
pH 7.2
ORP 375 mV
SYSTEM OK <HOT KEY>
STATUS
SYS OK
TEMP: 72.1F
FLOW: ON
Thursday, August 29, 2013 02:24:10 PM (Wk1)
NUMBER Keys- Used to enter new values in the SET UP mode and to access desired sub menus.
UP/DOWN - Used to cycle through text options to find desired setting.
LEFT/RIGHT - Used to cycle through text or setting options to find desired setting.
SET UP/RUN - System initializes into RUN mode. Press this key to put the controller in SET UP
Mode and see HOME menu page.
ENTER - Used to log a changed value into program.
HOME - Used to go back to the HOME menu page.
CANCEL - Used to cancel a pop-up screen if no change is desired.
HELP - Used to access help screens.
BACK - Used to go back to last menu screen viewed or clear values keyed in that are not
wanted.
The bottom right box in the RUN screen mode is a hot key that will take you directly to a particular menu
screen. The default is the RELAY status menu but this can be changed by navigating to the desired screen
and pressing the HELP button. Follow the on-screen instructions to set the new hot key location.