ADVANTAGE AIR MyAir, Руководство по установке

Страница: 17 / 23

Installation Guide V1.2
15
16 - SYSTEM CONFIGURATION
6. Power up the air conditioning system.
7. Open the MyPlace app on the home page of the wall mounted touch screen
8. Press the SETUP button
9. Press the TECH SETUP button.
10. Enter password 22369 to access the setup.
11. Press Run Wizard, and follow the prompts on the screen.
12. When you have completed the setup wizard press ADVANCED to see
additional options below.
• SET ACTIVATION CODE (Optional 21-day activation feature)
By setting a 4-digit activation (lock-out) code the air con system will stop
working after 21 days, it is STRONGLY recommended that your company
always uses the same 4-digit pin code, and that everyone in your company
knows this number. If the pin code to a system is forgotten, the control box
requires replacing to activate the system.
• BALANCE ZONES
This is where you can balance your zones if needed. For example: if zone 6
has too much air fl ow we could set MAX 80% this would result in the motor
never driving past the 80% open position, the customer will not see these
changes on the zone screen.
• TEMPERATURE SENSORS
This screen allows you to check each sensor is operating correctly, each
zone will display one of the below:
• Multiple sensors on this zone - Two or more sensors are con
fi gured
to the same zone or you may be picking up a neighbour’s system in
which case you would need to change the System ID, via the System ID
dipswitch in the CB.
• Battery Low - Check that the antenna is fi tted to the CB, ensure there is
a battery fi tted within the sensor & the sensor is within range.
• Sensor OK - Check that all sensors show OK before proceeding.
SENSOR NOT DISPLAYED: No sensor set for this zone, it will be % control only. If
you have a sensor in this zone check the battery strip is removed, check battery
inserted correctly. Check System ID is correct & check that only one sensor is
con fi gured for each zone.