8
Opening Bottom Covers
CAUTION:
To prevent loss of work and damage to the system or drive:
If you are inserting or removing a drive, shut down the operating system
properly, turn off the system, and unplug the power cord. Do not remove a drive
while the system is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While
handling a drive, avoid touching the connector.
1.
Turn off the system power properly through the operating system, then turn off any external
devices.
2.
Disconnect the power cord from the power outlet and disconnect any external devices.
3.
Remove the scanner module.
4.
Place the main unit face down. Then remove the three screws indicated at the rear of the unit.
CAUTION:
To avoid scratching the panel while dismantling the system, first place a piece of
cloth or cushion on your work surface.
5.
Lift off the plastic rear cover in the direction of the arrow.
6.
Remove the two plastic side panels.
