AdvanPOS CP-2010 Series Скачать руководство пользователя страница 2

Страница: 2 / 33

How to Use This Manual

This manual contains information to set up and use the CP-2010. In addition, instructions are included for
added hardware, software, upgrades, and optional items.

Chapter 1

An introduction to what you find in the CP-2010 and an overview of product specifications,

appearance, and interface.

Chapter 2

Detailed installation information for the base unit and upgrades, including the CPU Module,

HDD and SD card.

Chapter 3

Mounting procedures for optional devices, such as wall mount kit.

Chapter 4

CP-2010 carry board diagrams, locations of jumpers, and connectors.

Chapter 5

Installation instructions for the MSTI video driver, audio, LAN and touch screen tools.

WARNING!

Text set off in this manner indicates that failure to follow directions could result

in bodily harm or loss of life.

CAUTION:

Text set off in this manner indicates that failure to follow directions could result

in damage to equipment or loss of information.

NOTE:

Text set off in this manner provides important supplemental information.

Содержание CP-2010 Series


































Результаты поиска

Содержание CP-2010 Series

Отзывы:

Похожие инструкции для CP-2010 Series

Бренды по названию

Популярные бренды

AdvanPOS CP-2010 Series, Руководство пользователя

Результаты поиска

Содержание CP-2010 Series

Отзывы:

Похожие инструкции для CP-2010 Series

Бренды по названию

Популярные бренды