2.6
Remove Spacer Assembly
KEEP
these parts and screws to set aside and reinstall. A checklist is provided in
section 2.7.
JK-9500
kit replaces these parts.
2.6.1
Remove the Spacer
Remove and set aside the spacer screws
(#1 PH), the nylon spacer, and the automatic
shutoff spring.
Remove and discard the shoulder bolt (2 mm
hex) and the lever.
2.6.2
Remove the Air Cylinder
Use the 2 mm hex driver to loosen the
setscrew that locks the main air cylinder.
Use the 13 mm wrench to remove and discard
the air cylinder.
2.6.3
Remove the Air Valve Mount and Silencer
Use the 3 mm driver to remove and set aside the screws
securing the valve mount to the jet body.
If still attached, use a #1PH to loosen the screw on the jet
cable connector.
Loosen screws attaching the air valve to the valve mount.
Remove and discard the air valve.
Use a wrench to remove and discard the muffler.
DISCARD
DISCARD
KEEP
DISCARD
DISCARD
KEEP
KEEP
3A6328A
Advanjet HM-2600 Hotmelt Jet Maintenance and Repair
Page 15 of 28
