Advanipc AES-1210 Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 52

Advanipc AES-1210 Series Скачать руководство пользователя страница 37

37

3.3.3

Advanced Screen

In this section, you may set the configurations for the following items: CPU Configuration,
Super I/O Configuration, Chipset Configuration, Storage Configuration, ACPI
Configuration, USB Configuration and Voltage Configuration.

Instant Flash

Instant Flash is a UEFI flash utility embedded in Flash ROM. This convenient UEFI update
tool allows you to update system UEFI without entering operating systems first like
MS-DOS or Windows

®

.

Just launch this tool and save the new UEFI file to your USB flash

drive or hard drive, then you can update your UEFI only in a few clicks without preparing
an additional floppy diskette or other complicated flash utility. Please be noted that the
USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant
Flash utility, the utility will show the UEFI files and their respective information. Select the
proper UEFI file to update your UEFI, and reboot your system after UEFI update process
completes.

«
...
35
36
37
38
39
...
»

Содержание AES-1210 Series





















































Отзывы:

Нет отзывов