Advanced Wireless Communications AWR-D7000 Скачать руководство пользователя страница 23

Страница: 23 / 26

Operation instruction

Damaged antenna

Damaged antennas shall be replaced. Exposure to the metallic

portions of a damaged antenna can lead to burns.

Battery

Batteries shall not be changed or charged in explosive

risk environments. Minor flames and / or sparks can

lead to an explosion.

Any metal conductor, such as jewelry or keys, touching the battery

contacts may lead to a short circuit condition that may result in a fire or

burn. Care should be exercised to insure that the battery contacts are

not allowed to touch other objects.

Radio’s maintenance

1. Chemicals such as alcohol, cleaning fluids, and petroleum based

products will damage the radio surfaces.

2. Do not pick up the radio using the antenna or purposely stress the

housing and belt clip.

3. Please close the dust proof cover to protect the Microphone/

speaker jack while not using accessory.

4. Clean the surface of the radio with only a damp cloth using water.

Insure that none of the water enters the radio case.

5. Unrecognized accessories may damage the radio and in this case

our warranty will be unavailable.

Содержание AWR-D7000


























Результаты поиска

Содержание AWR-D7000

Отзывы:

Похожие инструкции для AWR-D7000

Бренды по названию

Популярные бренды

Advanced Wireless Communications AWR-D7000, Руководство пользователя

Результаты поиска

Содержание AWR-D7000

Отзывы:

Похожие инструкции для AWR-D7000

Бренды по названию

Популярные бренды