Advanced Solutions P-410, Руководство пользователя

Страница: 7 / 16

4
FIG.12
FIG.11 FIG.10
FIG.2 FIG.6
FIG.9 FIG.8
A B
C
D
A. Detergent and water switch
B. Suction button
C. Steam button
D. Steam button lock
4 th STEP: HOSE CONNECTION
•
To connect the steam plug, lift the fl ap that covers the socket (fi g.8),
insert the plug fully, then close the fl ap. To disconnect the plug, lift
the cover, press the red cursor and pull the plug.
•
For the suction intake (fi g.9) it is suffi cient to insert it fully into the
sleeve and to disconnect it, press the slider into the sleeve and pull
the nozzle.
BEFORE WORKING WITH THE MACHINE, MAKE SURE THAT
EVERYTHING IS WELL CONNECTED.
5
th
STEP: ACCESSORY STARTING
• All the accessories carry out the double function of suction and
steam. They fi t in directly on the handle or on the extensions.
•
Move the ring nut to open position and keep it open (fi g.10).
•
Fit in the extension hose or the accessory (fi g.11).
• Move the ring nut to close position. Release the spring wheel for
the hose extension.
CONTROLS ON HANDLE
•
SUCTION: press the button on the right above the handle (B)
once to start the suction motor and once to switch it off (fi g.12).
Both starting and stopping the engine are of the "ramp" type so
wait a couple of seconds before obtaining maximum power or
switching off .
NOTE: The suction button (B) must not be operated at the same time
as the other controls (A and C).
e.g: First start vacuum then spray steam.
• WATER JET AND DETERGENT: press the switch on the left
above the handle (A) for dispensing both water + steam and
det steam (N.B: dispensing will continue until it is
intentionally interrupted by the user). To stop dispensing, press
the switch (A) again.
•
STEAM: hold down the button located under the handle (C) for
steam output and release it for interruption (fi g.12).
ATTENTION: DO NOT USE STEAM OR WATER JETS
ON ELECTRICAL APPLIANCES IN OPERATION OR
UNDER VOLTAGE!