Advanced Solutions P-410, Руководство пользователя

Страница: 6 / 16

3
FIG.5
FIG.2 FIG.6
FIG.6
FIG.2 FIG.6
FIG.7
A
E
C
B D
LIST OF THE PANELS FUNCTIONS
A. Main switch
B. Detergent quantity adjustment
C. Display
D. Water / detergent function selector and
water quantity adjustment
E. Adjustment knob +/- output
steam
3
rd
STEP: TURNING ON
• Connect the power cord of the vacuum cleaner to the machine
(fi g. 1)
• Connect the power cable of the machine to a 220 Volts -16 A
socket equipped with an earthed socket.
•
Set the vacuum cleaner switch to "1" (fi g. 5)
•
Place the machine switch on "1" (fi g. 6), the display will turn
on and the word "HEAT" will appear. After about 8 minutes
the boiler will be ready to work and the display will show the
temperature.
• The steam must be adjusted according to the surface to be
treated using the knob (fi g.7).
NOTES: If the water in the tank runs out, the message "H2O-c" will
appear on the display, at the same time the steam supply will stop; in
this case, turn off the machine, fi ll the water tank (2
nd
step) and turn it
back on (3 rd
step).
DETERGENT / WATER JET SELECTION: press button D to choose
the desired function, the words “CHEM” will appear on the display
to indicate that the Detergent function has been selected and “HjEt”
for the Water jet function. The last selected function will remain
memorized also for the next start-up of the machine.
DETERGENT QUANTITY ADJUSTMENT: hold down button B, the
display will show the adjustment values from minimum to maximum
in sequence, once the desired number is displayed, release button B
and immediately press it quickly to memorize the choice made.
WATER QUANTITY ADJUSTMENT (HYDRO-JET): hold down
button D, the display will show the adjustment values from minimum
to maximum in sequence, once the desired number is displayed,
release button D and immediately press it quickly to memorize the
choice made.
The settings chosen will remain memorized even for the next
start-up of the machine.