Advanced Instruments GPR-2800 IS Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 52

Advanced Instruments GPR-2800 IS Скачать руководство пользователя страница 23

Advanced Instruments, Inc

22

Main Menu

To access the MAIN MENU, press the MENU (ESC) key and the following screen will appear.

MAIN MENU

AUTO SAMPLE

MANUAL SAMPLE

CALIBRATION

CONFIG ALARMS

BYPASS ALARMS

This screen shows various options available. You can use the UP and DOWN arrow key to move the cursor
and highlight the desired function. After moving the cursor to the desired function, press ENTER to access
that function.

Range Selection

The GPR-1800 IS transmitter is equipped with four (5) standard measuring ranges (see specification) and
provides users with a choice of sampling modes. By accessing the MAIN MENU, users may select either the
AUTO SAMPLING (ranging) or MANUAL SAMPLING (to lock on a single range) mode.

Note:

For calibration purposes, use of the AUTO SAMPLE mode is recommended. For example, calibration

with ambient air (20.9% oxygen), the analyzer will automatically turn into 0-25% range. However, the user
can also select the MANUAL SAMPLE mode for calibration but the span gas must not exceed the full scale
of the manual range selected – for example, a span gas with an 8% oxygen concentration in nitrogen would
dictate the use of the 0-10% full scale range for calibration.

Auto Sampling

Access the MAIN MENU by pressing the MENU key.

Advance the reverse shade cursor using the ARROW keys to highlight AUTO SAMPLE.

Press the ENTER key to select the highlighted menu option.

The display returns to the sampling mode:

MAIN MENU

AUTO SAMPLE

MANUAL SAMPLE

CALIBRATION

CONFIG ALARMS

BYPASS ALARMS

0.3 %

AUTO SAMPLING
1% RANGE

76 F 100 KPA

The display will shift to the next higher range when the oxygen reading exceeds 99.9% of the upper limit of
the current range. The display will shift to the next lower range when the oxygen reading drops to 85% of the
next lower range.

«
...
21
22
23
24
25
...
»

Содержание GPR-2800 IS





















































Отзывы:

Нет отзывов