a d v a n c e d i l l u m i n a t i o n . c o m
P u l s a r 3 2 0 M a n u a l
P u l s a r 3 2 0 M a n u a l
Pulsar Setup
Once we know what the system and network settings are, we can configure the
Pulsar 320 controller to communicate across the network via TCP/IP.
Connect to the Pulsar 320
The Pulsar must first be configured via USB.
1. Connect the target Pulsar 320 unit
via USB
cable to host PC
2. Connect 24VDC power source and toggle the controller
ON
3. Launch
“PulsarV00_02.exe”
4. In the parent window, select the
USB icon
to establish a USB
connection
This will open the USB port select dialog.
5. Select the
USB port
to connect to -- usually
port 0
for a single Pulsar
6. Once connection is established, select Query
7. In the information box you can view current IP, Subnet, Gateway,
and other pertinent information regarding current settings on
the controller.
8. To edit network settings press Edit Network
9 Before assigning a new IP address you must choose and IP
address that won’t conflict with any other devices on the
network (PCs, printers, routers, other machines, etc.).
For most small networks with <255 devices, the first 3 sets of digits should
match, with only the last digits being unique.
Example:
PC IP Address:
192.168.24.50
Pulsar IP Address: 192.168.24.240
45
Appendix D - Figure 25: USB Port Configuration
Содержание Pulsar 320
Страница 1: ...P u l s a r 3 2 0 M a n u a l Pulsar 320 Strobe Controller Operator s Manual Installation Guide...
Страница 35: ...P u l s a r 3 2 0 M a n u a l P u l s a r 3 2 0 M a n u a l 35 Appendix A Figure 18 IPD Connection Diagram...
Страница 36: ...a d v a n c e d i l l u m i n a t i o n c o m 36 Appendix B Figure 19 Pulsar 320 Loader Utility Appendix B...
Страница 48: ...a d v a n c e d i l l u m i n a t i o n c o m...
