Advanced Illumination Pulsar 320, Руководство оператора и инструкция по установке

Страница: 29 / 48

a d v a n c e d i l l u m i n a t i o n . c o m
P u l s a r 3 2 0 M a n u a l P u l s a r 3 2 0 M a n u a l 29
Light Head Outputs
2 Independent Outputs with
Independent Signatech II for each
Output
(Electrical)
Employs Proprietary Signatech II
Protection Scheme
Generally located within
attached light head
Signatech I Compatible
Requires AD-C2C5
adapter cable
(Mechanical)
Independent Connector Available
for Each Output
5-Position Phoenix
Contact Combicon
header
(Protocol)
Maxim/Dallas 1024-Bit 1-Wire
EEPROM
Signatech II
Diagnostics
Error Codes Read via LED Display
(optional local control)
Error Codes Read via USB &
Ethernet (standard remote)
Error Codes Read via Panel
Mounted LEDs
CE Conformance
Conforms to CE Requirements for
EMI supression
(Specifications cont.)
8.0 Advanced Users Section
This section addresses features, settings, configurations and communication
protocol used or required under certain operating conditions and installations.
This information is provided as a reference and may be used when developing
custom integration solutions.
It is advised that users contact Advanced illumination when special
requirements
exist.
Dip switch S1 and momentary switches SW2 & SW3 are located on the main pc
board. Removal of the back plate is required to gain access (see Figure 14).
Table 3: Specifications