background image

AMM213TD2 

  

35

Out-of-Warranty

ADVAN or its ASC will repair or replace if defective in material or workmanship with 

fee, any product which the warranty period has expired (out-of-warranty).

Buyer must notify ADVAN or its ASC of the defect and request an RMA number.  If 

the configuration has been modified in any manner, the product must be returned to 

its original configuration before any service will be performed by ADVAN or its ASC. 

No goods are to be returned to ADVAN or its ASC without prior authorization. Buyer 

will be responsible for packaging (preferably original container) and shipping the 

defective goods to ADVAN or its ASC, shipping charges prepaid.

ADVAN or its ASC will return the out-of-warranty product, at cost to the buyer.

Product End of Life (EOL)

In the event of an RMA of an EOL product(s), ADVAN will hold or store major 

components of its products for a period of five (5) years, after the EOL of its 

products.  ADVAN shall continue to perform the service of its products as long as 

ADVAN holds or stores said components of the products, with reasonable charge.

The forgoing Warranty and Out-of-Warranty terms apply.

Содержание AMM213TD2







































Отзывы: