9
7
Creating the Cross-Connect
1. Enter
cross-connect 1
serial 1/1 frame-
relay 1
to connect the serial connection
between the router and the TSU/ESU base
unit to the virtual frame-relay interface fr
1.16.
Alternately (for PPP),
1. Enter
cross-connect 1
serial 1/1 ppp 1
to
connect the serial connection between the
router and the TSU/ESU base unit to the
virtual PPP interface labeled 1.
8
Configuring RIP
1. Enter
router rip
to activate the router
configuration mode. Your prompt should now
display
(config-rip)#
.
2. Enter
version 2
to globally define RIP
version 2 on all interfaces.
3. Enter
network 192.22.72.0 255.255.255.0
to activate RIP on the virtual interface and
network 10.10.20.0 255.255.255.0
for the
Ethernet interface (eth 0/1).
4. Enter
exit
to return to the Global
configuration mode.
The following steps assume the Global configuration mode is currently active. Verify that the
prompt of your module displays
(config)#
.
The RIP configuration only applies to interfaces with IP addresses on the networks listed using
the
network
command.
RIP.txt - Notepad
! This script configures the global RIP parameters for the
! router and adds the PPP 1 interface to the network list.
! A text version of this script (RIP.txt) is available on the
! TSU NetVanta Router Module Documentation CD.
!
! Activate the router configuration mode.
router rip
!
! Your prompt should now display
Router(config-rip)#
.
!
! Define the RIP version. This command sets the version
! for all interfaces using RIP.
version 2
!
! Add the interfaces using RIP to the network list.
network
192.22.72.0 255.255.255.0
network
10.10.20.0 255.255.255.0
!
! Exit back to the global configuration mode.
exit
!
! End script
Cross.txt - Notepad
! This script creates a cross-connect to map the TDM
! group containing 10 DS0s on t1 1/1 to the virtual
! interface. A text version of this script (Cross.txt) is
! available on the TSU NetVanta Router Module
! Documentation CD.
!
cross-connect
1
serial 1/1 frame-relay
1
!
! Alternately, the cross-connect could be used to connect
! to the virtual PPP interface.
!
cross-connect
1
serial 1/1 ppp
1
!
! End script
