8
6a
Creating the Interface
1. Enter
interface ppp 1
to create a PPP
virtual interface labeled 1.
2. Enter
no shutdown
to activate the interface
to pass data.
3. Enter
exit
to return to the Global
configuration mode.
6b
Configuring the IP Parameters
1. Enter
interface ppp 1
to activate the PPP
interface configuration mode.
2. Enter
ip address 192.22.72.1
255.255.255.0
to assign an IP address to the
PPP endpoint using a 24-bit subnet mask.
3. To activate the PPP interface, enter the
no shutdown
command.
4. Enter
exit
to return to the Global
configuration mode.
ppp1-IP.txt - Notepad
! This script configures the virtual PPP endpoint labeled 1
! with an IP address. A text version of this script
! (ppp1-IP.txt) is available on the TSU NetVanta Router
! Module
! Documentation CD.
!
! First activate the PPP interface configuration mode.
interface ppp
1
!
! This activates the configuration parameters for this
! interface. Your prompt should now display
! Router(config-ppp1)#.
!
! Next, assign an IP address using a 24 bit mask.
ip address
192.22.72.1 255.255.255.0
!
! Activate the interface to pass data.
no shutdown
!
! Exit back to the global configuration mode
exit
!
! End script
ppp1.txt - Notepad
! This script creates a virtual PPP endpoint labeled 1.
! A text version of this script (ppp1.txt) is available on the
! TSU NetVanta Router Module Documentation CD.
!
! First create the virtual PPP interface and enter the
! configuration mode for the interface.
interface ppp
1
!
! This activates the configuration parameters for this
! interface. Your prompt should now display
! Router(config-ppp1)#.
!
! Activate the interface to pass data.
no shutdown
!
! Exit back to the global configuration mode.
exit
!
! End script
