ADTRAN Total Access OC-3 L3, Установка и эксплуатация

Страница: 36 / 38

B-2 61181031L3-5A
Figure B-1. OC-3 MUX Menu Tree (continued)
1. Mux Service State
1. In Service
2. Out Of Service, Maintenance
3. Out Of Service, Unassigned
1. Disabled
2. Enabled
1. Receive OC-3 from both A and B Fibers
2. Receive OC-3 from Fiber A
3. Receive OC-3 from Fiber B
4. Free Run
5. External DS1 SF or ESF from both inputs
6. External DS1 SF or ESF from Primary input
7. External DS1 SF or ESF from Secondary input
8. External DS1 ESF with Sync Messages from both inputs
9. External DS1 ESF with Sync Messages from Primary input
10. External DS1 ESF with Sync Messages from Secondary input
6. Restore Factory Defaults
7. Start Y-Modem Download
8. TFTP File Name
9. Start TFTP Download
Download Status
Reboot Into New Software
3. Clock Source
4. DCC Options
1. OC-3 DCC
2. System ID :
3. NSAP Area Address :
Terminal ID :
5. Access OSI Stack
Reboot Into New Address
1. DCC Mode
Information Transfer Service
Window Size
Maximum Retransmissions (N200)
Maximum I-Frame Length (N201)
Response Timeout (T200) in msec
Link Inactive Timeout (T203) in msec
1. Disabled
2. User
3. Network
1. Clock Out Enable
5. Clock Out Options
1. Disabled
2. Enabled
1. Single Shelf Output
2. Dual Shelf Output
1. 000 - 133 feet
2. 134 - 266 feet
3. 267 - 399 feet
4. 400 - 533 feet
5. 534 - 655 feet
1. DS1 SF
1. Receive OC-3
2. External Clock In
3. Internal Clock
1. A Output = Copy 0, B Output = Copy 1
2. A and B Outputs = Copy 0
3. A and B Outputs = Copy 1
4. A and B Outputs = TX Clock Source
6. Clock Out Source Copy
5. Clock Out Source
4. Clock Out Type
2. Clock Output
3. Clock Out Line Build Out
2. Linked Provisioning
A1
2. DS1 ESF with Synchronization
Messages