manualshive.com logo in svg

ADTRAN Total Access 3010, Системное руководство, Страница: 403 / 511

Поделиться
Скачать
ADTRAN Total Access 3010 Скачать руководство пользователя страница 403

6TADLP742-1E

TOTAL ACCESS 3000/3010

DLP-742

Page 3 of 14

Total Access

®

 3000/3010 System Manual

© 2003, ADTRAN, Inc.

Perform Steps Below in the Order Listed

1. From the Provisioning Menu select option 2, 

Linked Provisioning

, and press

<Enter>.

1.

Enable

2.

Disable

NOTE

In a protection configuration, it is recommended to select option 1 to enable
Linked Provisioning so that the Protect MUX is automatically provisioned
with the identical settings as the Primary MUX.

Select the desired option by typing the corresponding number and press <Enter>.

2. From the Provisioning Menu select option 3, 

Signal Fail Threshold

, and press

<Enter>. This option sets the Bit Error Rate (BER) at which service is
unacceptable for a particular application. If a protection card with a less severe
impairment is available, the traffic will be transferred to that card.

1.

1x10

-3

2.

1x10

-4

3.

1x10

-5

Select the desired option by typing the corresponding number and press <Enter>.

3. From the Provisioning Menu select option 4, 

Signal Degradation Threshold

, and

press <Enter>. This option sets the BER at which service is marginal or
“degraded” for a particular application. If a protection card with a less severe
impairment is available, the traffic will be transferred to that card.

1.

1x10

-5

2.

1x10

-6

3.

1x10

-7

4.

1x10

-8

5.

1.10-9

Select the desired option by typing the corresponding number and press <Enter>.

Содержание Total Access 3010
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов