manualshive.com logo in svg

ADTRAN Total Access 3010, Системное руководство, Страница: 387 / 511

Поделиться
Скачать
ADTRAN Total Access 3010 Скачать руководство пользователя страница 387

Total Access

®

 3000/3010 System Manual

6TADLP740-1E

TOTAL ACCESS 3000/3010

DLP-740

Page 5 of 10

© 2003, ADTRAN, Inc.

Perform Steps Below in the Order Listed

3. As an example, from the Daily Threshold Menu select option 1, 

Code

Violation…….L

, and press <Enter>.

1.

Set Alarm Threshold

2.

Set Alarm Enable

Set the Alarm Threshold and then Enable the alarm to be issued if the set threshold
value is exceeded.

4. Return to the Performance Monitoring Menu by pressing <Esc>.

5. From the Performance Monitoring Menu select option 6, 

Far-End Daily

Threshold

, and press <Enter>.

1.

Code Violation……………  CP-P

2.

Errored Second…………..  CP-P

3.

Severely Errored Second…CP-P

4.

Unavailable Second……...  CP-P

6. For an example, from the Far-End Daily Threshold Menu select option 2, 

Errored

Second……CP-P

, and press <Enter>.

1.

Set Alarm Threshold

2.

Set Alarm Enable

Set the Alarm Threshold and then Enable the alarm to be issued if the set
threshold value is exceeded.

7. Return to the Working MUX Main Menu by pressing <Esc> and proceed to the

next section.

1.5

Protection Configuration Provisioning

This provisioning option is only used when two DS-3 MUX Modules are installed and
will be used in a protection switching configuration. Please proceed with the following
steps to provision protection switching on the working MUX. If the MUX is in a single
configuration, please continue this procedure at Section 5, 

Channel Mapping

Provisioning

.

1. From the Working MUX Main Menu select option 7, 

Protection Configuration

,

and press <Enter>.

2. From the Protection Configuration Menu select option 3, 

BER Line Switch

, and

press <Enter>.
This option “INHIBITS” or “ALLOWS” APS operation based on the Bit Error

Содержание Total Access 3010
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов