TA 544 User Manual
© 2001, ADTRAN, Inc.
TA 544 User Manual/61200704L1-1A
Page 48 of 68
The following settings are used for FRF8.
L
AN
FR M
AINT
P
ROTOCOL
Frame Relay maintenance or signaling protocol
between local V.35 port and the attached DTE
port, support ANSI Annex A, CCITT Q933 An-
nex D, CISCO LMI or Static (no signaling).
L
AN
FR P
OLL
T
IMEOUT
T392 (5-30)
T392 for signaling protocol, typical value 15. No
meaning if Maint Protocol is Static.
F
R
/ATM PVC M
APPING
Up to 4 mappings are supported.
FR DLCI
Frame Relay DLCI on V.35 port.
ATM VPI
Specifies the virtual path to which DLCI is
mapped.
ATM VCI
Specifies the virtual circuit to which DLCI is
mapped.
T
RANSLATE
Translate or transparent mode between
Frame Relay frames and ATM cells.
D
E
M
AP
Map Frame Relay DE bit to ATM CLPI bit,
Always 0, Always 1 or Convert each other.
F
ECN
M
AP
Map Frame Relay FECN bit toATM EFCI
bit, Always 0, Always 1 or Convert each
other.
