TA 544 User Manual
© 2001, ADTRAN, Inc.
TA 544 User Manual/61200704L1-1A
Page 20 of 68
> Maint Port Menu
The TA 544’s VT 100
CRAFT
port can be accessed via an RJ-48 located on the rear panel. The setup for these ports
is under this menu.
Password Protect
When set to
O
FF
, the maintenance port is not password protected. When
O
N
(def), the TA 544 will prompt
for a password upon startup.
Password
This is the text string that is used for comparison when password protecting the maintenance port. By
default, no password is entered.
If you forget your password, type CHALLENGE in all capital letters. Call technical support and
have the displayed CHALLENGE code ready.
The security level for the maintenance port is always set to 0. This gives full access to all menus.
Passwords are case-sensitive.
Instructions for Changing Passwords
Step
Action
1
Select the P
ASSWORD
field—a new P
ASSWORD
field displays.
2
Type the new password in the E
NTER
field.
3
Type the new password again in the C
ONFIRM
field.
The password can contain up to 12 alphanumeric characters.You
can also use spaces and special characters in the password.
