Configuring Your IAD
NetVanta 950 IAD Configuration Guide
4
© 2004 ADTRAN, Inc.
61200788L1-29.1B
Common Applications
•
POTS to PSTN via T1 - less expensive than individual analog trunk lines
•
POTS to Centrex service via T1
•
PBX to PSTN via T1 or FXO
•
OPX
Types of Signaling
•
Analog: Loop Start, Ground Start, E&M, DPT (FXO only)
•
Digital: Robbed-Bit, Clear Channel
2. CONFIGURING YOUR IAD
The remainder of this document provides examples designed to clarify the configuration of analog (FXS or
FXO) or digital (T1) voice. Section 2a describes how to configure the IAD with the Web GUI. Section 2b
(starting on page 16) describes how to configure the IAD with the CLI.
2a. Configuring your IAD with the Web GUI
You can configure your IAD with the interactive Web GUI. The web-based GUI lets you configure the
main settings and provides online guidance and explanations for each setting. However, you may have to
use the AOS CLI for more advanced configurations.
Logging In
Open a browser window and type the IP address for the unit in the address field. A login window
(shown in Figure 4) displays.
Figure 4. Login Screen
Enter your
U
SER
NAME
and
P
ASSWORD
; then click
OK
. The default username is
admin
, and the default
password is
password
. The
IAD M
ANAGEMENT
I
NTERFACE
for the NetVanta 950 displays as shown in
Figure 5 on page 5. For information on setting your IP address and connecting the IAD to the LAN,
refer to the NetVanta 950 IAD Quick Configuration Guide provided on your
ADTRAN OS
Documentation
CD.
