NetVanta 950 IAD Configuration Guide
Verifying Your Configuration Using Show Commands
61200788L1-29.1B
© 2004 ADTRAN, Inc.
37
show interface fxs 2/1
Shows current settings,
status for FXS interface
2/1
fxs 2/1 is UP
Description of possible port status values:
administratively down: Port is shutdown
dormant: Port is not in service
UP: Port is active
DOWN: Port is not available
IN TEST: Port is in test mode
Two-wire Status is: Disabled
Test Status is INACTIVE
No Tests
Impedance is: 600 Ohm
Transmit Gain is: +0.0dB
Receive Gain is: -10.0dB
Signal Mode: Loop-Start
Answer-Supervision: Disabled
show interface fxo 7/1
Shows current settings,
status for FXO interface
7/1
fxo 7/1 is UP
Description of possible port status values:
administratively down: Port is shutdown
dormant: Port is not in service
UP: Port is active
DOWN: Port is not available
IN TEST: Port is in test mode
Two-wire Status is: Disabled
Test Status is INACTIVE
No Tests
Impedance is: 600 Ohm +2.16uF
Transmit Gain is: +0.0dB
Receive Gain is: +10.0dB
Signal Mode: Loop-Start
Answer-Supervision: Disabled
show system
Shows system settings
such as firmware version,
serial number, clock
settings and power
source
ADTRAN, Inc. OS version b-07.01.00
Checksum: 2A6CF621, built on Wed July 28 13:22:17 2004
Boot ROM version b-07.01.00
Checksum: A4E1, built on: Wed July 28 13:27:08 2004
Copyright (c) 1999-2004, ADTRAN, Inc.
Platform: NETVANTA 950 SCU, part number 1200788L1
Serial number E1900AE0F
Flash: 8388608 bytes DRAM: 33554431 bytes
IAD uptime is 0 days, 6 hours, 5 minutes, 6 seconds
System returned to ROM by Warm Start
Current system image file is "070100.biz"
Boot system image file is "070100.biz"
Power Source: AC
System primary clock source configuration: t1 0/1
System secondary clock source configuration: t1 0/2
System current active clock source: t1 0/2
Alarm Relay status: OPEN
Command
Description
Sample Output
