Unit Installation
NetVanta 1224STR DC Hardware Installation Guide
42
Copyright © 2013 ADTRAN, Inc.
61200590E1-34B
Figure 19. NetVanta VPN Accelerator Card Installation
Your NetVanta unit is now ready to be configured and connected to the network. For information on switch
configuration for a specific application, refer to the configuration guides provided online on
For details on the CLI, refer to the
AOS Command Reference Guide
(ADTRAN’s Support
Forum article 2219). All other related documents are also available online on
.
Instructions for Installing the NetVanta VPN Accelerator Card
Step
Action
1
Remove power from the unit.
2
Remove the screws holding the base unit and the cover together and, if necessary, two mounting
brackets (see
3
Using a 3/16-inch hex driver, remove the two jack screws located on either side of the DB-9 port.
4
Carefully lift and remove the unit’s cover to expose the circuit board.
5
Gently slide the accelerator card into the PCI slot as shown. The card is keyed to fit into the slot
only one way. To avoid damaging the card pins, do not use excessive force.
6
Replace the unit cover, screws, and mounting brackets.
7
Restore power to the unit.
Содержание NetVanta 1224STR PWR
Страница 10: ...Table of Contents NetVanta 1224STR DC Hardware Installation Guide 10 Copyright 2013 ADTRAN Inc 61200590E1 34B ...
Страница 12: ...List of Figures NetVanta 1224STR DC Hardware Installation Guide 12 Copyright 2013 ADTRAN Inc 61200590E1 34B ...
Страница 14: ...List of Tables NetVanta 1224STR DC Hardware Installation Guide 14 Copyright 2013 ADTRAN Inc 61200590E1 34B ...