ADTRAN Express 3100, Руководство пользователя

Страница: 96 / 128

Appendix A. AT Commands and S-Registers
A-12 Express 3100 User Manual 61200240L2-20
S37
Conference/
Call Waiting Flash-hook button defaults to:
0=Call waiting
1=Call conferencing
S38
X25 TEI = 255
S40
Bond TXINIT Specifies the number of seconds the originating endpoint
attempts to detect the Async BONDING negotiation
pattern from the answering endpoint before deciding the
Async BONDING call has failed.
0 to 255, 10 sec is default.
S41
Bond TXFA Specifies the number of seconds both endpoints attempt
to detect the async BONDING frame pattern when a call
is connected before deciding the async BONDING call has
failed. When operating with other manufacturer's async
BONDING equipment, it may be necessary to lengthen
this timer so that it matches TXADD01.
0 to 255, 10 sec is default.
S42
Bond TXADD The number of seconds both endpoints wait for the
additional call to be connected at the end of negotiation
before deciding the async BONDING call has failed.
When dialing overseas it may be necessary to lengthen
this timer to allow for slower call routing.
0 to 255, 50 sec is default
S43
Bond TXDEQ The number of seconds both endpoints attempt to
equalize the network delay between the bearer channels
before deciding the Async BONDING call has failed.
0 to 255, 50 sec is default
S44
Bond TANULL The number of seconds the answering endpoint attempts
to detect the Async BONDING negotiation pattern from
the originating endpoint before aborting to clear channel
mode. It may be necessary to shorten this timer if the DTE
equipment connected to the Express 3100 also has timer
constraints for completing non-BONDING parameter
negotiation.
0 to 255, 10 sec is default
S45
Bond TCID The number of seconds both endpoints attempt to
negotiate agreeable values for bearer channels and
channel capacities before deciding the async BONDING
call has failed.
0 to 255, 5 sec is default
S-Registers List
(Continued)
Command
Function Features