ADTRAN Cable T1 ESF CSU ACE, Руководство пользователя

Страница: 43 / 86

Chapter 3. Operation
61203025L1-1 T1 ESF CSU ACE User Manual 3-7
*T1 ERR/ALM has same menu sub-branches as NI ERR/ALM. **T1 HISTORY has same as NI HISTORY.
Figure 3-7. T1 ESF CSU ACE MenuTree
1)NI PERF RPTS RESET PERF CNTRS
SES
LOSS OF SIGNAL ES
AIS ALARM %AV
2)NI ERR/ALM OUT OF FRAME CLEAR HISTORY %EF
YELLOW ALARM LOSS OF SIGNAL CVS
1)STATUS RED ALARM AIS ALARM
CODE VIOLATIONS OUT OF FRAME 1)FORMAT
BIPOLAR VIOLATIONS YELLOW ALARM 2)CODE
FRAME BIT ERRORS RED ALARM 3)YEL ALRM
CODE VIOLATIONS 4)XMIT PRM
3)NI HIST BIPOLAR VIOLATIONS 5)KEEP ALIVE
4)T1 ERR ALM* FRAME BIT ERRORS 6)BIT STUFFING
5)T1 HISTORY** 7)SET LBO
8)NET LB
1)NETWORK (NI) 9)RX SENSITIVITY
1)MODEM INIT
MAIN MENU 2)UNIT 1)CONTROL PORT 2)DATA RATE
2)CONFIG 2)ALARMS 1)TRAPS
2)OUTPUT 1)FORMAT
3)TEL NUM 2)CODE
3)TERMINAL (T1) 3)SET LBO
1)TIME/DATE TIME: HH:MM:SS
DATE: MM/DD/YY
3)UTIL 2)SOFTWARE REV (Dis-
plays current s/w rev)
3)REINIT UNIT
4)ADDRESS
5)SET PASSCODE
1)REMOTE UNIT (Select
remote unit type)
6)FACT RESTORE (Returns
all configs to factory settings)
2)SHELF SNMP ID: NO LOOPBACK
7)REMOTE T-WATCH 3)SHELF SLOT: DTE ON
LINE ON NO LOOPBACK
1)LOCAL LOOPBACK PAYLOAD ON AT&T INBAND LLB
ANSI FDL LLB
4)TEST 2)REM LB AT&T FDL PLB
NO PATTERN
3)TEST PATTERN ALL ZEROS
1:8 ALL DS0s
ALL ONES
4)RUN SELFTEST