ADTRAN ATLAS 800PLUS, Руководство пользователя

Страница: 88 / 166

Chapter 5. Using the Terminal Menu
5-36 ATLAS
_
800
PLUS
User Manual 61200226L1-1
Out#Rej
Write security: 3; Read security: 5
This submenu defines the parameters for the outgoing calls that ATLAS will
not send to the Network.
Reject Numbers
This field identifies which numbers this end point will not pass on
toward the Network (PSTN). The reject list may consist of multiple
entries. The reject list may be used to more easily specify the call fil-
tering desired. The “wild cards” are identical as in Outgoing Call
Accept.
The Reject list takes precedence over the Accept list.
Examples:
1- 900-$ would reject all 1-900 long distance calls.
1-$ would reject all long distance calls.
Data 64 Kbps, Analog, Speech, and Treat Call As.
These items allow ATLAS to reject outgoing calls based on call type.
Example:
A “$” for the Reject Number and Digital 56/64 enabled and
Audio & Speech Disabled would reject all digital calls while not
rejecting analog calls.
This list may remain blank if the Accept list meets desired filter-
ing.
Interface Configuration
This menu sets configuration parameters for the end point. These parameters
will vary by the type of port selected. For detailed information on the inter-
face configuration for all of the available modules, refer to “Interface Configu-
ration” on page 5-41.
User Terminations
This menu allows you to define option parameters for ports which terminate a
connection from user equipment. In this case, ATLAS
_ 800
PLUS
is acting like the
Network.
In applications where two ATLAS units are used in a point-to-point configura-
tion, a port in the ATLAS at one end would act as the Network (set up as a User
Termination), while the ATLAS at the opposite end would be terminating a Net-
work connection.