background image

Environment

■ Operating Temperature: 32°F to 122°F (0°C to 50°C)
■ Storage Temperature: -4°F to 158°F (-20°C to 70°C)
■ Relative Humidity: Up to 95 percent, non-condensing

Electrical

■ Power Supply: 100 to 240 VAC, 50-60 Hz, 4.0 A
■ Max Power: 100V input, 35 W

■ Lightning Requirements:

♦ AC Port to a minimum of 2kV
♦ Ethernet Port (Longitudinal lightning test) 1500V 100A, 1.2/50-8/20 surge (per Telcordia GR-1089-CORE issue 6, Type 4 interface)
♦ Ethernet Port (Metallic lightning test) 800V 100A, 1.2/50-8/20 surge (per Telcordia GR-1089-CORE issue 6, Type 4 interface)

CAUTION!

f

CAUTION!

f

This product is intended for business deployment in restricted access locations. Care should be taken to protect cables from damage or 

vandalism.

CAUTION!

f

CAUTION!

f

Electrostatic Discharge (ESD) can damage electronic devices. When handling devices, wear an antistatic discharge wrist strap to prevent 

damage to electronic components. Place in antistatic packing material when transporting or storing. When installing or maintaining, always 

place devices on an approved antistatic mat that is electrically grounded.

The following configuration guides provide additional 

information for this ADTRAN product (available online at 

https://supportcommunity.adtran.com

).

Configuring the CLI in ASE

Configuring QoS in ASE

Configuring Layer 2 Services in ASE

Configuring PoE in ASE

Configuring DHCP in ASE

Configuring MRP and MVRP in ASE

ASE Command Reference Guide

For ADTRAN training inquiries, visit:

 http://adtran.com/

training

Access additional safety information and product documentation using the 

QR code or website

.

https://supportcommunity.adtran.com

Warranty:

ADTRAN will replace or repair this product within the warranty period if it does not 

meet its published specifications or fails while in service. Warranty information can be 

found online at 

www.adtran.com/warranty

.

Trademarks:

 Brand names and product names included in this document are trademarks, 

registered trademarks, or trade names of their respective holders.

Copyright © 2021 ADTRAN, Inc. All Rights Reserved.

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

*617101763F1-13A*

ADTRAN CUSTOMER CARE:

From within the U.S.     1.888.423.8726

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY  1.800.827.0807

Содержание 17101763F1










Отзывы: