ADTRAN 1700405G1, Руководство по установке оборудования

Страница: 23 / 30

NetVanta 100 Series Hardware Installation Guide Unit Installation
61700412E1-34C Copyright © 2010 ADTRAN, Inc. 23
Ceiling Mounting
The NetVanta 150 can be safely mounted on the ceiling by following these steps:
Figure 4. Ceiling Mounting the NetVanta 150 (Exploded View)
Instructions for Ceiling Mounting
Step Action
1 Install the antennas on the WAP. Refer to Installing the Antennas on page 21 .
2 Using the mounting bracket (P/N 1700405G1) as a template, drill three holes in the ceiling tile
large enough for the #8-32 bolts.
3 Attach the mounting bracket to the ceiling tile using the provided #8-32 bolts, washers, and nuts
in the order shown in the Exploded View in
Figure 4 below.
4 Insert the downward extending prongs of the mounting bracket into the keyholes on the bottom
of the unit as indicated by the Number 1 in the Side View in
Figure 5 on page 24 .
5 Slide the unit backwards until the hook on the mounting bracket slides over the unit’s plastic
casing, and the mounting bracket prongs are locked into the unit’s keyholes as indicated by the
Number 2 in the Side View in
Figure 5 on page 24 .
6 Attach all wires to the bracket using a wire tie through the hole located in the back of the hook
shown in the Bracket Detail in
Figure 5 on page 24 .
7 Proceed to the steps given in Getting Started on page 24 .
®
1
2
Mounting Bracket
Ceiling Tile
Exploded View