ADTRAN 1202052L1, Руководство пользователя

Страница: 100 / 136

Chapter 8. Telnet/Terminal Menus
8-6 TSU 100 User Manual 61202052L1-1
Units accessed via T-WATCH Pro over TCP/IP use the Unit ID
and passcode set by T-WATCH Pro running on the PC.
Figure 8-3. Unit Access Table
Add New Unit
Add New Unit
adds a new device to the table. You must enter a
device Unit ID, Passcode, Unit Type, and Polled Flag.
• Unit type can be Standard (which supports any TSU/TDU
Multiplexer and the ISU 512) or TSU Standalone (a single
port TSU with no option card slot).
• A passcode of 0
to
9999 for each device or DEFAULT may
be selected, which results in the default passcode being
used (defined as
0022 in Figure 8-3).
• Traps are normally sent from the unit in alarm to the TSU
100.
• For units in the Unit Access Table that are not chained di-
rectly to the TSU 100 but are managed over Inband or the
FDL, traps are not automatically forwarded.
• Polling must be enabled on the TSU 100 for these units in or-
der to receive Traps on the NMS. The TSU 100 can be con-
figured to poll selected units for traps by enabling the
polled option when adding or modifying a unit entry.
____________________Unit Access Table_______________________
Unit ID Passcode Type Polled PollStatus
20 DEFAULT Standard No
3 0033 Standard Yes UP
6 0095 TSU Standalone No
8 0022 Standard Yes UP
1) Add New Unit
2) Modify Unit
3) Delete Unit
4) Default Unit Passcode 0022
5) OK