background image

Chapter 3. Operation

61200.184L1-1

Quad Nx 56/64 Module User Manual

9

Menu

 

Selecting this item displays additional status and configuration menus 

about the selected module. (To access the submenus for this item, use the 

arrow keys to scroll to the Menu column for the module you want to edit, 

and press 

 

Enter

 

.)  For detailed information on each submenu item, see the 

section 

 

Quad Nx 56/64 Module Menu Options

 

 on page 10.

 

Alarms

 

Read security: 5

This field displays whether there is an alarm condition on the Quad Nx 

56/64 Module.  Press 

 

Enter

 

 in this field to activate the Alarm menu.

 

Test 

 

Read security: 5

This field displays whether the Quad Nx 56/64 Module is executing a 

test. Press 

 

Enter

 

 in this field to activate the Test menu.

 

State

 

Write security: 3; Read security: 5

Even though a module is physically installed, it must be marked Online 

for it to be considered an available resource.  This parameter allows an 

installed module to be marked Offline, which may be useful in system 

troubleshooting.

 

Status

 

Read security: 5

This is a read-only field presenting status information on the Quad Nx 

56/64 Module.  The following  messages may display:

 

Hardware Revision

 

Read security: 5

This is a read-only field that displays the hardware revision of the Quad 

Nx 56/64 Module. 

 

Online:

 

The module is enabled, and is responding to the Sys-

tem Controller’s status polls.  This is the normal 

response of the system.

 

No Response:

 

The module is enabled, but is not responding to the 

System Controller’s status polls.  This response indi-

cates either a problem in the system or that the mod-

ule is not installed.

 

Empty:

 

The System Controller has not detected the presence 

of a module in the slot, nor has a module been manu-

ally enabled for this option slot.

 

Offline

 

The module is installed, but has been taken Offline 

by a user. The module is still responding to controller 

polls.

 

Offline/

No Response:

 

The module is installed, but has been taken Offline 

by a user. The module is not responding to polls.

Содержание 1200184L1




























Отзывы: