Enter the port number in the ‘port’ field. The port number must match the port number
used on the transmitter where the range is 0 to 65535. When 0, multicast is disabled. If
you are new to multicast and attempting a first time connection, 2000 is a common port to
start with. Please verify transmitter port configuration.
Choose the IP Rx ‘Connector’ dependent upon your network setup. Adtec recommends
using the GigE port for all IP receptions.
Once IP Rx is configured, click Apply.
Visit the Input -> Service tab and click the ‘Select first found’ radio button to enable IP
reception. IP service names will populate in the service list.
‘Select first found’ is also available via the Front Panel -> Services Menu -> Select First
configuration. Use the left/right arrows to select [IP], press select, then press enter to start
IP receiving.
