Adtec edje 4111 HD, Руководство по эксплуатации

Страница: 21 / 42

19 Chapter3 - mediaControl Setup
Playout
The playout settings allow you to set video, audio and Synchronous
playback setting. (Fig 3.4)
Figure 3.4
Video
Display Target:
The display target setting is the output resolution and refresh rate used
simultaneously on both the DVI and the composite BNC video outputs.
Therefore to view video on the composite BNC output port, select one of
the NTSC or PAL display targets. All the other resolutions are appropriate
for the DVI output. Note that the server will automatically up or downscale
the video as needed to match the Display Target resolution.
Repeat:
The repeat setting specifies how lists play on the media server. Repeat
All will loop a list or file, One will repeat the first item in the list, Last will
play the list and repeat the last item in the list. Repeat One (Seamless) is
a special mode that will loop one media file with no transitions for a more
seamless effect.
Blank Mode:
The Blank Mode sets the state of the video output whenever the media
server transport state is idle or is in transition.
S ettings:
NOVIDEO: Total absence of video signal and sync
BLACK Holds a black video signal
HOLD Holds the last frame/field of the encoded file
Start Up:
Determins whether or not your decoder begins decoding when it is booted
up or not.
Settings:
On: Start decoding on boot
Off: Stay idle on boot.
Audio
SPDIF:
The SPDIF mode changes the format of the SPDIF digital audio.
Settings:
OFF: No SPDIF output
UNCOMPRESSED: Uncompressed (decoded) stereo PCM on SPDIF
COMPRESSED Compressed (non-decoded) data on SPDIF required for 5.1
channels of AC-3 digital audio.
PASSTHROUGH: Audio is only output on SPDIF in compressed format and
the analog audio is turned off.
Synchronous Playback
STC Beacon:
Enables multiple media servers to play back content that is synchronized.
One media server is designated as a master which is followed in sync by
one or more slave media servers. The Master communicates to the slave
media servers over an ethernet connection using broadcast packets.
Settings:
OFF: Turns off synchronous playback.
Slave: A slave in a single group of units.
Master: A master in a single group of units.
X0: A slave in a unique group X of units where X can be 1-9.
1X0: A master in a unique group X of units where X can be 1-9.